Image is for illustration purposes only.
Ricardo Generator
Ricardo 125 kVA Diesel Generator
The Ricardo 125 kVA diesel generator delivers 125 kVA / 100 kW in standby and 113 kVA / 90.4 kW in prime operation. Power comes from a six-cylinder, 6.75 L RICARDO R6105IZLD turbocharged intercooled engine with a 400/230 V, 50 Hz three-phase output.
- Standby Power (ESP)
- 125kVA· 100 kW
- Prime Power (PRP)
- 113kVA· 90.4 kW
Technical Specifications
Power & Electrical
- Standby Power (ESP)
- 125 kVA / 100 kW / 180 A
- Prime Power (PRP)
- 113 kVA / 90.4 kW / 163 A
- Voltage
- 400/230 V
- Frequency
- 50 Hz
- Phase
- 3
- Power Factor
- 0.8
Engine
- Engine Brand
- Ricardo
- Engine Model
- R6105IZLD
- Cylinders
- 6 / Inline
- Displacement
- 6.75 L
- Bore x Stroke
- 105 x 130 mm
- Compression Ratio
- 16:1
- Aspiration
- Turbocharged Intercooled
- Cooling System Capacity
- 26
- Fuel Consumption (100% load)
- 26.5 L/h
- Fuel Consumption (75% load)
- 19.8 L/h
Alternator
- Voltage / Frequency
- 400/230 V - 50 Hz
- Phase
- 3
- Power Factor
- 0.8
- Insulation Class
- H
- Protection Class
- IP23
Dimensions
- Canopied Type (L x W x H)
- 3150 x 1100 x 1600 mm
- Open Type (L x W)
- 2300 x 1100 mm
Product Information
- Category
- Ricardo Generator
- Stock Code
- NDX-RIC-125
- Warranty
- 24 months
- Country of Origin
- Türkiye
Overview
Ricardo 125 kVA Diesel Generator (NDX-RIC-125)
Planning for the Ricardo 125 kVA diesel generator starts with its footprint, drawn well before the set reaches site. The canopy version measures 3150 x 1100 x 1600 mm, while the open-frame version occupies 2300 x 1100 mm, so clearances to walls, doors and service corridors are set in advance. Width stays at 1100 mm in both versions, so a plinth designed for one arrangement still serves the other. The set produces 125 kVA / 100 kW in standby and 113 kVA / 90.4 kW in prime operation on a 400/230 V system.
Engine
Power comes from a RICARDO R6105IZLD diesel engine: six cylinders in an inline block, 6.75 L displacement, bore and stroke 105 x 130 mm. The compression ratio is 16:1 and the aspiration is turbocharged intercooled, so charge air is cooled before entering the cylinders. Fuel consumption is 26.5 L/hour at 100% load and 19.8 L/hour at 75% load, a direct basis for tank sizing and refuelling intervals.
Alternator and Electrical Data
The alternator runs at 400/230 V and 50 Hz in three-phase configuration, power factor 0.8. Output current is 180 A at standby power and 163 A at prime power. Winding insulation is class H and the enclosure protection rating is IP23.
- Standby power (ESP): 125 kVA / 100 kW / 180 A
- Prime power (PRP): 113 kVA / 90.4 kW / 163 A
- Engine: RICARDO R6105IZLD, 6 cylinders inline, 6.75 L, 105 x 130 mm
- Compression ratio 16:1, turbocharged intercooled aspiration
- Voltage and frequency: 400/230 V, 50 Hz, 3 phase, power factor 0.8
- Insulation class H, protection class IP23
- Fuel consumption: 26.5 L/hour at 100% load, 19.8 L/hour at 75% load
- Model: Ricardo 125 kVA, stock code NDX-RIC-125
Installation and Use
The canopy version, at 3150 x 1100 x 1600 mm, comes in a closed enclosure and suits outdoor placement. The open-frame version has a 2300 x 1100 mm footprint, so a shorter run of floor space is enough where a generator room already exists. The product is made in Türkiye and carries a 24-month warranty.
