Image is for illustration purposes only.
Baudouin Generators
Baudouin 150 kVA Diesel Generator
Delivering 150 kVA / 120 kW standby and 135 kVA / 108 kW prime power, the Baudouin 150 kVA diesel generator is driven by a 6-cylinder, 6.75 L BAUDOUIN 6M11G150/5 engine with a 400/230 V, 50 Hz three-phase output for load-matched capacity planning.
- Standby Power (ESP)
- 150kVA· 120 kW
- Prime Power (PRP)
- 135kVA· 108 kW
Technical Specifications
Power & Electrical
- Standby Power (ESP)
- 150 kVA / 120 kW / 217 A
- Prime Power (PRP)
- 135 kVA / 108 kW / 195 A
- Voltage
- 400/230 V
- Frequency
- 50 Hz
- Phase
- 3
- Power Factor
- 0.8
Engine
- Engine Brand
- Baudouin
- Engine Model
- 6M11G150/5
- Cylinders
- 6 / Inline
- Displacement
- 6.75 L
- Bore x Stroke
- 105 x 130 mm
- Compression Ratio
- 18:1
- Aspiration
- Turbocharged Aftercooled
- Cooling System Capacity
- 25
- Fuel Consumption (100% load)
- 31.5 L/h
- Fuel Consumption (75% load)
- 23.5 L/h
Alternator
- Voltage / Frequency
- 400/230 V - 50 Hz
- Phase
- 3
- Power Factor
- 0.8
- Insulation Class
- H
- Protection Class
- IP23
Dimensions
- Canopied Type (L x W x H)
- 3400 x 1150 x 1750 mm
- Open Type (L x W)
- 2500 x 1150 mm
Product Information
- Category
- Baudouin Generators
- Stock Code
- NDX-BAU-150
- Warranty
- 24 months
- Country of Origin
- Türkiye
Overview
Baudouin 150 kVA Diesel Generator
Sizing a generator comes down to the gap between a site's peak inrush demand and its steady running load. The NDX-BAU-150 covers both from one frame: 150 kVA / 120 kW standby (ESP) and 135 kVA / 108 kW prime (PRP). At a 0.8 power factor these ratings correspond to 217 A and 195 A on a 400/230 V system, so keeping the continuous load within the 135 kVA figure leaves headroom for motor starting currents.
Engine
Power comes from the BAUDOUIN 6M11G150/5 diesel engine, a 6-cylinder inline unit of 6.75 litres with a 105 x 130 mm bore and stroke and an 18:1 compression ratio. Its turbocharged aftercooled intake cools the charge air before it reaches the cylinders. Fuel consumption is 31.5 L/h at 100% load and 23.5 L/h at 75% load, which makes tank sizing straightforward once daily run hours are known.
Alternator and Electrical Values
The alternator output is 400/230 V at 50 Hz, three-phase, rated at a 0.8 power factor. Winding insulation is class H and the protection rating is IP23. On a 400 V line the set supplies 217 A in standby duty and 195 A in prime duty, so switchgear and cable cross-sections should be dimensioned to these currents rather than to the kVA figure alone.
- Standby (ESP): 150 kVA / 120 kW / 217 A
- Prime (PRP): 135 kVA / 108 kW / 195 A
- Engine: BAUDOUIN 6M11G150/5, 6-cylinder inline, 6.75 L
- Bore x stroke 105 x 130 mm, compression ratio 18:1, turbocharged aftercooled
- Output: 400/230 V, 50 Hz, 3-phase, power factor 0.8
- Insulation class H, protection class IP23
- Fuel consumption: 31.5 L/h at 100% load, 23.5 L/h at 75% load
- Stock code: NDX-BAU-150
Installation and Use
The set can be specified as a canopied or open-type unit. The canopy measures 3400 x 1150 x 1750 mm, while the open-type skid occupies 2500 x 1150 mm; the layout should also allow clearance for service access and airflow. The product is of Turkish origin and carries a 24-month warranty.
