Image is for illustration purposes only.
Baudouin Generators
Baudouin 165 kVA Diesel Generator
The Baudouin 165 kVA diesel generator delivers 165 kVA / 132 kW in standby duty and 150 kVA / 120 kW in prime duty. Power comes from a 6-cylinder, 6.75-litre BAUDOUIN 6M11G165/5 turbocharged aftercooled engine with a 400/230 V, 50 Hz three-phase output.
- Standby Power (ESP)
- 165kVA· 132 kW
- Prime Power (PRP)
- 150kVA· 120 kW
Technical Specifications
Power & Electrical
- Standby Power (ESP)
- 165 kVA / 132 kW / 238 A
- Prime Power (PRP)
- 150 kVA / 120 kW / 217 A
- Voltage
- 400/230 V
- Frequency
- 50 Hz
- Phase
- 3
- Power Factor
- 0.8
Engine
- Engine Brand
- Baudouin
- Engine Model
- 6M11G165/5
- Cylinders
- 6 / Inline
- Displacement
- 6.75 L
- Bore x Stroke
- 105 x 130 mm
- Compression Ratio
- 18:1
- Aspiration
- Turbocharged Aftercooled
- Cooling System Capacity
- 25
- Fuel Consumption (100% load)
- 32.6 L/h
- Fuel Consumption (75% load)
- 24.3 L/h
Alternator
- Voltage / Frequency
- 400/230 V - 50 Hz
- Phase
- 3
- Power Factor
- 0.8
- Insulation Class
- H
- Protection Class
- IP23
Dimensions
- Canopied Type (L x W x H)
- 3400 x 1150 x 1750 mm
- Open Type (L x W)
- 2500 x 1150 mm
Product Information
- Category
- Baudouin Generators
- Stock Code
- NDX-BAU-165
- Warranty
- 24 months
- Country of Origin
- Türkiye
Overview
Baudouin 165 kVA Diesel Generator
Sizing a generator is less about the headline rating than about how the load actually behaves over time. This set is rated 165 kVA / 132 kW for standby duty, where it carries the site during a mains failure, and 150 kVA / 120 kW for prime duty under continuous running. The margin between the two ratings leaves headroom for the inrush of motor-driven equipment. Calculated at a 0.8 power factor, the unit fits installations drawing around 120 kW of active load.
Engine
A BAUDOUIN 6M11G165/5 diesel engine drives the set. The block is a 6-cylinder inline design of 6.75 litres, with a 105 x 130 mm bore and stroke and an 18:1 compression ratio. A turbocharged aftercooled intake cools the charge air before combustion. Fuel consumption is 32.6 L/h at full load and 24.3 L/h at 75% load, and the stated cooling capacity figure is 25.
Alternator and Electrical Data
The alternator runs at 400/230 V and 50 Hz in a three-phase configuration with a 0.8 power factor. Output current is 238 A in standby duty and 217 A in prime duty, the figures that govern switchgear and cable sizing. Winding insulation is class H and the protection rating is IP23.
- Standby power: 165 kVA / 132 kW / 238 A
- Prime power: 150 kVA / 120 kW / 217 A
- Voltage and frequency: 400/230 V, 50 Hz, 3 phase
- Engine: BAUDOUIN 6M11G165/5, 6-cylinder inline, 6.75 L
- Intake: turbocharged aftercooled, 18:1 compression ratio
- Insulation class H, protection class IP23
- Fuel consumption: 32.6 L/h at 100% load, 24.3 L/h at 75% load
Installation and Use
The canopied version measures 3400 x 1150 x 1750 mm, while the open-frame version occupies a 2500 x 1150 mm footprint. Allow headroom above the canopied unit; the open set is intended for a dedicated plant room. Supplied under the Nidexa name, the generator originates from Türkiye and carries a 24-month warranty. Stock code: NDX-BAU-165.
