Image is for illustration purposes only.
Perkins Generator
Perkins 33 kVA Diesel Generator
Built around a Perkins 1103A-33G engine, this 33 kVA diesel generator delivers 33 kVA / 26.4 kW in standby duty and 30 kVA / 24 kW continuously. Its 400/230 V, 50 Hz three-phase output suits sites that must cover peak and base load with one machine.
- Standby Power (ESP)
- 33kVA· 26.4 kW
- Prime Power (PRP)
- 30kVA· 24 kW
Technical Specifications
Power & Electrical
- Standby Power (ESP)
- 33 kVA / 26.4 kW / 48 A
- Prime Power (PRP)
- 30 kVA / 24 kW / 43 A
- Voltage
- 400/230 V
- Frequency
- 50 Hz
- Phase
- 3
- Power Factor
- 0.8
Engine
- Engine Brand
- Perkins
- Engine Model
- 1103A-33G
- Cylinders
- 3 / Inline
- Displacement
- 3.3 L
- Bore x Stroke
- 105 x 127 mm
- Compression Ratio
- 19.25:1
- Aspiration
- Natural Aspiration
- Cooling System Capacity
- 10.2
- Fuel Consumption (100% load)
- 7.1 L/h
- Fuel Consumption (75% load)
- 5.4 L/h
Alternator
- Voltage / Frequency
- 400/230 V - 50 Hz
- Phase
- 3
- Power Factor
- 0.8
- Insulation Class
- H
- Protection Class
- IP23
Dimensions
- Canopied Type (L x W x H)
- 2000 x 950 x 1260 mm
- Open Type (L x W)
- 1700 x 950 mm
Product Information
- Category
- Perkins Generator
- Stock Code
- NDX-PER-33
- Warranty
- 24 months
- Country of Origin
- Türkiye
Overview
Perkins 33 kVA Diesel Generator (NDX-PER-33)
Choosing a machine in the 33 kVA class comes down to the gap between a site's peak demand and the base load that cannot be interrupted. The Nidexa Perkins 33 kVA diesel generator states both figures separately: 33 kVA / 26.4 kW standby power (ESP) when the mains drop out, and 30 kVA / 24 kW prime power (PRP) for circuits that run most of the day. Rated currents of 48 A in standby and 43 A in continuous duty let the unit be checked against a panel schedule and cable sizing, and every value references a 0.8 power factor, which matters where motor-driven loads dominate.
Engine
The prime mover is a Perkins 1103A-33G diesel with three inline cylinders. It displaces 3.3 litres, has a 105 x 127 mm bore and stroke and runs a 19.25:1 compression ratio. The intake is naturally aspirated, so there is no turbocharging stage in the air path. Fuel consumption is 7.1 L/h at 100% load and 5.4 L/h at 75% load; the cooling capacity value is 10.2.
Alternator and Electrical Ratings
The alternator supplies 400/230 V at 50 Hz across three phases, so three-phase machinery and 230 V single-phase circuits share one system. Power factor is 0.8, insulation is class H and the protection rating is IP23. Output current is 48 A in standby and 43 A in continuous operation.
- Standby (ESP) output: 33 kVA / 26.4 kW / 48 A
- Prime (PRP) output: 30 kVA / 24 kW / 43 A
- Engine: Perkins 1103A-33G, 3 inline cylinders, 3.3 L, naturally aspirated
- Voltage and frequency: 400/230 V, 50 Hz, 3 phase, 0.8 power factor
- Class H insulation, IP23 protection rating
- Fuel consumption: 7.1 L/h at 100% load, 5.4 L/h at 75% load
- Canopy dimensions: 2000 x 950 x 1260 mm
- Stock code: NDX-PER-33
Installation and Use
The canopy version measures 2000 x 950 x 1260 mm (L x W x H) and the open frame 1700 x 950 mm (L x W), a difference the installation area must allow for. The unit originates in Türkiye and carries a 24-month warranty. Model designation Perkins 33 kVA, stock code NDX-PER-33.
