Image is for illustration purposes only.
Shanghai Dongfeng Generator
Shanghai Dongfeng 1100 kVA Diesel Generator
The Shanghai Dongfeng 1100 kVA diesel generator delivers 1100 kVA / 880 kW standby and 1000 kVA / 800 kW prime power. Its 32.8-litre six-cylinder SDEC SC33W1150D2 engine burns 230 L/h at full load, with a 400/230 V, 50 Hz three-phase output.
- Standby Power (ESP)
- 1100kVA· 880 kW
- Prime Power (PRP)
- 1000kVA· 800 kW
Technical Specifications
Power & Electrical
- Standby Power (ESP)
- 1100 kVA / 880 kW / 1588 A
- Prime Power (PRP)
- 1000 kVA / 800 kW / 1443 A
- Voltage
- 400/230 V
- Frequency
- 50 Hz
- Phase
- 3
- Power Factor
- 0.8
Engine
- Engine Brand
- Shanghai Dongfeng
- Engine Model
- SC33W1150D2
- Cylinders
- 6 / Inline
- Displacement
- 32.8 L
- Bore x Stroke
- 180 x 215 mm
- Compression Ratio
- 15:1
- Aspiration
- Turbocharged Aftercooled
- Cooling System Capacity
- 190
- Fuel Consumption (100% load)
- 230 L/h
- Fuel Consumption (75% load)
- 172.5 L/h
Alternator
- Voltage / Frequency
- 400/230 V - 50 Hz
- Phase
- 3
- Power Factor
- 0.8
- Insulation Class
- H
- Protection Class
- IP23
Dimensions
- Canopied Type (L x W x H)
- 6200 x 2300 x 2700 mm
- Open Type (L x W)
- 4800 x 2300 mm
Product Information
- Category
- Shanghai Dongfeng Generator
- Stock Code
- NDX-SDF-1100
- Warranty
- 24 months
- Country of Origin
- Türkiye
Overview
Shanghai Dongfeng 1100 kVA Diesel Generator
In this power class the real cost of a set is settled at the fuel tank, not on the nameplate. The Shanghai Dongfeng 1100 kVA diesel generator consumes 230 L/h at 100% load and 172.5 L/h at 75% load, so easing it back by a quarter of its rating removes 57.5 litres per hour from the bill. Across the 1100 kVA / 880 kW standby and 1000 kVA / 800 kW prime range, that curve shapes the operating budget over long running hours.
Engine
The set is built around the SDEC SC33W1150D2, a large-displacement diesel: six cylinders in line, 32.8 litres, with a 180 x 215 mm bore and stroke that favour torque at low engine speed. A 15:1 compression ratio works alongside a turbocharged, aftercooled intake: charge air is cooled before it reaches the cylinders, supporting more complete combustion of the injected fuel.
Alternator and Electrical Data
Output is 400/230 V at 50 Hz, three phase. At a 0.8 power factor the set delivers 1588 A in standby duty and 1443 A in continuous duty. The windings use class H insulation and the enclosure is rated IP23; the two define the thermal margin of the windings and the level of protection against ingress. The voltage level matches sites already distributing at 400/230 V.
- Standby power (ESP): 1100 kVA / 880 kW / 1588 A
- Prime power (PRP): 1000 kVA / 800 kW / 1443 A
- Engine: SDEC SC33W1150D2, six cylinders in line, 32.8 L
- Bore x stroke 180 x 215 mm, compression ratio 15:1
- Aspiration: turbocharged, aftercooled
- Fuel consumption: 230 L/h at 100% load, 172.5 L/h at 75% load
- Electrical: 400/230 V, 50 Hz, 3 phase, 0.8 power factor
- Class H insulation, IP23 protection, stock code NDX-SDF-1100
Installation and Operation
In canopied form the unit measures 6200 x 2300 x 2700 mm; the open version is 4800 x 2300 mm in length and width. Plant room and foundation layouts should follow these figures, allowing for canopy height and door swing. The product carries stock code NDX-SDF-1100, is made in Türkiye and covered by a 24 month warranty.
