
Image is for illustration purposes only.
Shanghai Dongfeng Generator
Shanghai Dongfeng 1000 kVA Diesel Generator
The Shanghai Dongfeng 1000 kVA diesel generator is built around the SDEC SC33W990D2 engine, rated 1000 kVA / 800 kW in standby and 900 kVA / 720 kW in prime duty, with a 400/230 V, 50 Hz three-phase output and 205 L/h fuel use at full load.
- Standby Power (ESP)
- 1000kVA· 800 kW
- Prime Power (PRP)
- 900kVA· 720 kW
Technical Specifications
Power & Electrical
- Standby Power (ESP)
- 1000 kVA / 800 kW / 1443 A
- Prime Power (PRP)
- 900 kVA / 720 kW / 1299 A
- Voltage
- 400/230 V
- Frequency
- 50 Hz
- Phase
- 3
- Power Factor
- 0.8
Engine
- Engine Brand
- Shanghai Dongfeng
- Engine Model
- SC33W990D2
- Cylinders
- 6 / Inline
- Displacement
- 32.8 L
- Bore x Stroke
- 180 x 215 mm
- Compression Ratio
- 15:1
- Aspiration
- Turbocharged Aftercooled
- Cooling System Capacity
- 190
- Fuel Consumption (100% load)
- 205 L/h
- Fuel Consumption (75% load)
- 153.7 L/h
Alternator
- Voltage / Frequency
- 400/230 V - 50 Hz
- Phase
- 3
- Power Factor
- 0.8
- Insulation Class
- H
- Protection Class
- IP23
Dimensions
- Canopied Type (L x W x H)
- 6200 x 2300 x 2700 mm
- Open Type (L x W)
- 4800 x 2300 mm
Product Information
- Category
- Shanghai Dongfeng Generator
- Stock Code
- NDX-SDF-1000
- Warranty
- 24 months
- Country of Origin
- Türkiye
Overview
Shanghai Dongfeng 1000 kVA Diesel Generator
For plants working near the megawatt mark, the deciding figure is rarely the purchase price; it is what the engine burns during every hour it runs. The Shanghai Dongfeng 1000 kVA diesel generator answers that with measured numbers: 205 litres per hour at full load and 153.7 litres per hour at 75 percent load. Where the daily load profile rises and falls, the part-load figure is the one that matters, because it turns an annual fuel budget into a calculation instead of a guess.
Engine
The set is driven by the SDEC SC33W990D2, a 32.8-litre engine with six cylinders in an inline layout. Bore and stroke measure 180 x 215 mm and the compression ratio is 15:1. Air is delivered through a turbocharged, aftercooled intake, and in cylinders of this size a denser charge is what keeps the output steady under heavy demand.
Alternator and Electrical Data
Output is three-phase at 400/230 V and 50 Hz, rated at a 0.8 power factor. In standby (ESP) duty the set delivers 1000 kVA / 800 kW with a current of 1443 A; in prime (PRP) duty it holds 900 kVA / 720 kW and 1299 A. The windings use class H insulation and the enclosure carries an IP23 protection rating.
- Standby power (ESP): 1000 kVA / 800 kW / 1443 A
- Prime power (PRP): 900 kVA / 720 kW / 1299 A
- Engine: SDEC SC33W990D2, 6 cylinders inline, 32.8 L
- Aspiration: turbocharged aftercooled, compression ratio 15:1
- Fuel consumption: 205 L/h at 100% load, 153.7 L/h at 75% load
- Electrical: 400/230 V, 50 Hz, 3 phase, 0.8 power factor
- Class H insulation, IP23 protection rating
- Stock code: NDX-SDF-1000
Installation and Use
With the canopy fitted the set measures 6200 x 2300 x 2700 mm; on the open skid the length and width are 4800 x 2300 mm. These are the dimensions to work from when laying out the generator room and planning the route the unit will travel to reach it. The generator is of Turkish origin and is covered by a 24-month warranty.
